What applications are you looking for Liquid Filters Applications?

Food & Beverage / High Purity Water and Drinking Water

Complete line of absolute rated membrane filter elements for your most demanding applications; we can also custom manufacture for your systems and applications up to 40 inches in length.

CLS helps you meet today’s regulatory requirements and provide fresh drinking water to satisfy growing population needs and water shortages. CLS’s filter cartridges and housings are designed to ensure your process will continue to provide fresh drinking water by eliminating sediment and other impurities. CLS continues to develop new and innovative products to meet the challenges in cost effective filtration.

  • HF Series High Flow Pleated Cartridges

    HF Series High Flow Pleated Cartridges

    REQUEST QUOTE
  • liquid-bars

    Liquid Filter Bags

    SELECT VARIATIONS
  • nylon-membrance

    Nylon 6,6 Membrane Cartridges

    SELECT VARIATIONS
  • poel-extended-life-bags

    POEL Extended Life Bag

    SELECT VARIATIONS
  • quad-series

    Quad Series Melt Blown Filters

    SELECT VARIATIONS
  • string-wound

    String Wound Cartridge

    SELECT VARIATIONS

Our Solutions used within the
Food & Beverage industry

For many years Clean Liquid Systems have been an integral part of the food industry, not just as a supplier, but also as an innovator and advisor. We have a wide range of liquid filters providing separation solutions for many different processes within the food and beverage industry.

  • Bottled Water
  • Cider
  • Beer- Corporate
  • Beer – Craft & Microbreweries
  • Dairies
  • Food & Ingredients
  • Juice
  • Mineral Waters
  • Pet Food
  • Soft drinks
  • Spirits
  • Wine Bottles

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Industrial Manufacturing / Micro Electronics / Solvents

Industrial Environments required specialized filtration that will withstand heavy application use. CLS has the product line to filter from .02 – 1000 microns. Housings and filter cartridges are suited to your environment. Whether you are filtering natural gas to remove impurities or eliminating metal shaving in a metal fabrication shop.

  • hazmat-sorbent

    HAZMAT Sorbent Cut Sheet

    REQUEST QUOTE
  • HF Series High Flow Pleated Cartridges

    HF Series High Flow Pleated Cartridges

    REQUEST QUOTE
  • liquid-bars

    Liquid Filter Bags

    SELECT VARIATIONS
  • nylon-membrance

    Nylon 6,6 Membrane Cartridges

    SELECT VARIATIONS
  • oil onl

    OIL Only Sorbent Cut Sheet

    REQUEST QUOTE
  • poel-extended-life-bags

    POEL Extended Life Bag

    SELECT VARIATIONS
  • quad-series

    Quad Series Melt Blown Filters

    SELECT VARIATIONS
  • standard-pleated

    Standard Efficiency Pleated

    SELECT VARIATIONS
  • string-wound

    String Wound Cartridge

    SELECT VARIATIONS
  • universal-sobrent

    Universal Sorbent Media

    REQUEST QUOTE

Our Solutions used within the
Industrial Manufacturing industry

For many years Clean Liquid Systems have been an integral part of the food industry, not just as a supplier, but also as an innovator and advisor. We have a wide range of liquid filters providing separation solutions for many different processes within the food and beverage industry.

  • Automotive
  • Filter Socks
  • General Industrial
  • Industrial OEM
  • Mining
  • Primary Metals
  • Pulp & Paper
  • Data Storage
  • Display
  • Graphic Arts
  • Photovoltaics
  • Semiconductor

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Microglass

Oil and Gas / Power Generation (liquid)

MicroGlass – Cellulose Blend or Resin Impregnated Cellulose Filter cartridges
Elements offer economical, high quality Beta rated filtration for applications where “absolute” filters are required. Elements are available in cellulose, glass-cellulose and microglass  media with a variety of end configurations and sizes.  The pleated design ensures high contaminant retention due to the large surface area.  Elements are available in ratings from 2 to 30 microns.

The N Series elements is an economical solution when absolute rated filtration is not required and are constructed with the same high quality material used in the B series. Elements are used for the removal of contaminant from a wide range of products as either prefilters or final filters. These cartridges are manufactured in a wide variety of configurations for replacing current industry cartridges. This pleated element is a superior alternative to conventional string would, resin bonded and meltblown cartridges. These elements are available in 10, 20, 30, 36 and 40” lengths.

Our Solutions used within the
Oil and Gas industry

For many years Clean Liquid Systems have been an integral part of the food industry, not just as a supplier, but also as an innovator and advisor. We have a wide range of liquid filters providing separation solutions for many different processes within the food and beverage industry.

  • Refining
  • Midstream
  • Upstream

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Liquid Filters

Synthetic Media Cartridges

Designed for filtration of water, water based fluids, and a wide range of chemicals. These filter cartridges stand up to continuous use in water based fluids without the softening and/or deterioration common with many resin impregnated paper cartridges. These elements are made with an advanced synthetic polyester media, which allows high flow rates with low pressure drops as well as excellent temperature resistance.

SL elements are available in removal ratings from 5 to 40 microns. SLH elements have wire mesh support for pleat strength are available in micron ranges of 1/2 to 40. Sizes are available to replace many existing paper cartridges.

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Contact us for more details

Liquid Filters

Hydraulic and Lubrication Oil filters

Hydraulic filter element applications are demanding and require filtration products that can withstand difficult conditions in industrial and mobile applications. Harsh conditions can often apply to hydraulic filter applications (like mining or military applications). Hydraulic power systems require assorted components like pumps, valves and cylinders to name a few. Keeping your system contamination-free with a quality hydraulic filter element can prolong the life of system components.

Stainless steel filter element products and metal felt filter element products for fluid power use. Either style can be cleaned to lengthen filter element life and reduce disposal costs.

Free and dissolved water in hydraulic systems can be removed using Sorbent Water Removal Filter Elements. These products are pleated with a special water absorber layer.

Our hydraulic filter elements are ideal replacements for many OEM elements and are designed to be functionally and dimensionally interchangeable.

Our Solutions used within the
Hydraulic and Lubrication Oil filters industry

For many years Clean Liquid Systems have been an integral part of the food industry, not just as a supplier, but also as an innovator and advisor. We have a wide range of liquid filters providing separation solutions for many different processes within the food and beverage industry.

  • Engines
  • Machinery
  • Marine

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Liquid Filters

Oil & Fuel Coalescers

Coalescer cartridges are offered in a variety of cartridge configurations to replace current industry cartridges. They are available with double open ends and flat gaskets, open ends with O-Ring seals, and thread base construction. Cartridges are available in a number of different diameters and lengths. All coalescers are single piece construction, resulting in increased strength and reducing the chance of bypass. We use a combination of one or more layers of pleated media and various layers of fiberglass. The pleated media removes the bulk of solids. Coalescing performance is determined by the type and number of layers of fiberglass.

Available in four different series of efficiency. These ratings are nominal and should be used for reference only:
Series Rated at Normally used for Removes water down to
25 series 25 micron fuels such as diesel or heating oils. 25 ppm
5 series 5 micron place of the 25 series when more efficiency is or tighter filtration is desired. 10 ppm
2 series 2 micron lighter hydrocarbons such as kerosene, gasoline, or naphtha. less than 5 ppm
1 series 1/2 to 1 micron is designed for maximum coalescing and particulate removal efficiency less than 5 ppm

Our Solutions used within the
Oil & Fuel industry

For many years Clean Liquid Systems have been an integral part of the food industry, not just as a supplier, but also as an innovator and advisor. We have a wide range of liquid filters providing separation solutions for many different processes within the food and beverage industry.

  • Water absorbing cartridges
  • Engines
  • Machinery
  • Marine

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Liquid Filters

Separators

Separator cartridge are available in two different designs – silicon treated pleated cellulose and a PTFE coated stainless steel screen.The silicon treated resin impregnated cellulose media is designed to repel small coalesced water droplets that do not settle by gravity and pass through the separator. This pleated media provides effective 5 micron particulate filtration.The PTFE coated screen separators are manufactured with 200 mesh stainless steel coated on both sides with PTFE. This media is hydrophobic allowing the hydrocarbon fluid to pass through while repelling the water droplets.

Center cores are perforated, plated steel. End caps are tin plated steel or glass reinforced nylon. Standard gaskets are Buna-N. Other gasket material are available upon request.

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Process

Clean Liquid Systems cartridges and media are specifically designed for manufacturing and separation of paints and inks in your environment. We know the removal of impurities from your products is essential to your success. This is why we work closely with you to ensure your filtration needs are met. CLS’s filters have been designed to prevent unwanted large particulate formation in your products. CLS understands your need to provide consistency within your product line. Clean Liquid Systems can provide you the filtration products and support to ensure your operation flows smoothly.

  • liquid-bars

    Liquid Filter Bags

    SELECT VARIATIONS
  • poel-extended-life-bags

    POEL Extended Life Bag

    SELECT VARIATIONS
  • quad-series

    Quad Series Melt Blown Filters

    SELECT VARIATIONS
  • standard-pleated

    Standard Efficiency Pleated

    SELECT VARIATIONS
  • string-wound

    String Wound Cartridge

    SELECT VARIATIONS

Our Solutions used within the
Process industry

For many years Clean Liquid Systems have been an integral part of the food industry, not just as a supplier, but also as an innovator and advisor. We have a wide range of liquid filters providing separation solutions for many different processes within the food and beverage industry.

  • Industrial
  • Inks, Paints and Coatings
  • Food and beverage

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Liquid Filters

Housings and Strainers

Single and multi-round housings are constructed of 316L stainless steel designed with standards for filtration applications requiring high purity production. Design characteristics minimize hold up volumes, provide for easy draining and cleanability. External surfaces mechanically polished and internal surface is acid washed for a consistent, easy care finish. Available to accommodate multiple configurations and up to 36 individual cartridges.

Additional styles of Multi-round housings are constructed of durable stainless steel and meet general purpose industrial and commercial filtration needs. All wetted welded surfaces are 316 stainless steel.

Accepts 10″, 20″, 30″ and 40″ cartridges with DOE, 222 and 226 configuration options.

High Flow Series Accepts large filter elements. Available in vertical or horizontal orientations, the High Flow housings can accept from 1 to 7 filter elements.

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Liquid Filters

Industrial (Cartridge, Bag and Strainer Basket)

Filter housings come in many sizes and styles, and all serve as a bag filter housing, filter strainer, cartridge filter or basket strainer. The filter housing covers are easily removed without special tools, and the element is easily cleaned or replaced. Please contact us to learn more about our filter housing products.

Strainer baskets may be lined with finer mesh screen or used with a disposable bag. The bags are available in many grades of felt materials with numerous types of felt media. We can offer assistance to help determine what may be best for your application.

How we can help you with your specific application?

Call Now 713.253.0100

Request Quote

Carbon Block Cartridges

-In-house produced Pre-Filtration Polypropylene Media wrap
-Increased Adsorption based upon higher exposed small carbon particle make-up
-Proprietary Carbon Blend Formulation
-Uniformed Micro-porous Dual Action Activated / Sediment Carbon Block Construction eliminates channeling
-More Stable Pressure Consistency
-UV Welded end caps—No Glues or Adhesives
-No GAC By-pass or Fluidizing
-Substantial Carbon Volume with Maximum Service Life
-FDA Compliant Constructed Materials
-Available up to 40” Length in 2.5” & 4.5” Outside Diameter
-Multiple Micron Rated Cartridges Available
-Cartridges manufactured to reduce Foul Odor, -Chlorine Taste and Particulate Matter
-Meets Federal EPA P231, State & Local Microbial
Purification Standards
-Meets or Exceeds NSF P231 standards for Microbial Purifier Water Treatment Systems
-Able to be used under Gravity or Pressure Application
-Meets NSF/ANSI standards 42, 53 and 61
-Meets the regulatory requirements of Californian Act Proposition 65 for drinking water

  • carbon-block-cartridges

    10um, Carbon Block, 10″Long, 222/Flat

    REQUEST QUOTE
  • carbon-block-cartridges

    10um, Carbon Block, 10″Long, Open/Open

    REQUEST QUOTE
  • carbon-block-cartridges

    10um, Carbon Block, 20″Long, 222/Flat

    REQUEST QUOTE
  • carbon-block-cartridges

    10um, Carbon Block, 20″Long, Open/Open

    REQUEST QUOTE
  • carbon-block-cartridges

    10um, Carbon Block, 30″Long, 222/Flat

    REQUEST QUOTE
  • carbon-block-cartridges

    10um, Carbon Block, 30″Long, Open/Open

    REQUEST QUOTE
  • carbon-block-cartridges

    10um, Carbon Block, 40″Long, 222/Flat

    REQUEST QUOTE
  • carbon-block-cartridges

    10um, Carbon Block, 40″Long, Open/Open

    REQUEST QUOTE
  • carbon-block-cartridges

    1um, Carbon Block, 10″Long, 222/Flat

    REQUEST QUOTE
  • carbon-block-cartridges

    1um, Carbon Block, 10″Long, Open/Open

    REQUEST QUOTE
  • carbon-block-cartridges

    1um, Carbon Block, 20″Long, 222/Flat

    REQUEST QUOTE
  • carbon-block-cartridges

    1um, Carbon Block, 20″Long, Open/Open

    REQUEST QUOTE

Filter Bags

-CLS liquid filter bags are manufactured in the USA, made with the highest grade material to offer you quality and efficiency in each bag
-All standard sizes are available with 15 different top rings to offer you the proper filter bag you need to adapt with your existing housings
-Ratings from 1 to 1000 micron and 8 different medias suitable to your application
-Bag Handles are standard on our bags at no additional cost
-Our filter bags are produced in a silicone free environment
-Custom bags, sleeves or panels can be produced to your specifications, offering you complete control of the filtration process
-Multi-Layered filter bags are available
-Optional Glazing inhibits fiber migration and enhances efficiency

  • 100um, Polyester Felt Bag, (#1) 7.0625″Diameter x 16.5″Long, Polypropylene Ring

    REQUEST QUOTE
  • 100um, Polyester Felt Bag, (#1) 7.0625″Diameter x 16.5″Long, Stainless Steel Ring

    REQUEST QUOTE
  • 100um, Polyester Felt Bag, (#1) 7.0625″Diameter x 16.5″Long, Steel Ring

    REQUEST QUOTE
  • 100um, Polyester Felt Bag, (#12) 8.0″Diameter x 32.0″Long, Polypropylene Ring

    REQUEST QUOTE
  • 100um, Polyester Felt Bag, (#12) 8.0″Diameter x 32.0″Long, Stainless Steel Ring

    REQUEST QUOTE
  • 100um, Polyester Felt Bag, (#12) 8.0″Diameter x 32.0″Long, Steel Ring

    REQUEST QUOTE
  • 100um, Polyester Felt Bag, (#2) 7.0625″Diameter x 32″Long, Polypropylene Ring

    REQUEST QUOTE
  • 100um, Polyester Felt Bag, (#2) 7.0625″Diameter x 32″Long, Stainless Steel Ring

    REQUEST QUOTE
  • 100um, Polyester Felt Bag, (#2) 7.0625″Diameter x 32″Long, Steel Ring

    REQUEST QUOTE
  • 10um, Polyester Felt Bag, (#1) 7.0625″Diameter x 16.5″Long, Polypropylene Ring

    REQUEST QUOTE
  • 10um, Polyester Felt Bag, (#1) 7.0625″Diameter x 16.5″Long, Stainless Steel Ring

    REQUEST QUOTE
  • 10um, Polyester Felt Bag, (#1) 7.0625″Diameter x 16.5″Long, Steel Ring

    REQUEST QUOTE

Glass Microfiber Cartridges

-CLS Glass Microfiber cartridges offer a wide array of retention ratings from .5 to 7 microns
-All Glass Microfiber cartridges are produced in-house on the most modern equipment
-Complete in-house testing guarantees a superior and consistent product
-We offer all end cap configurations to fit your applications and housings
-Cartridges have an excellent dirt holding capacity with low flow resistance
-Acrylic bonded media for excellent chemical resistance
-Each cartridge has a non-shedding final layer laminated on the media before pleating
-Media grades available for FDA Title 21 for food and potable water contact
-Hydrophobic media can be produced if required for your applications
-Cartridges are constructed in a clean room environment
-Cartridges may be ordered as final rinsed with 18 mega ohm water

  • 0.5um, Glass Microfiber Pleated, 10″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.5um, Glass Microfiber Pleated, 10″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.5um, Glass Microfiber Pleated, 20″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.5um, Glass Microfiber Pleated, 20″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.5um, Glass Microfiber Pleated, 30″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.5um, Glass Microfiber Pleated, 30″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.5um, Glass Microfiber Pleated, 40″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.5um, Glass Microfiber Pleated, 40″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.8um, Glass Microfiber Pleated, 10″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.8um, Glass Microfiber Pleated, 10″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.8um, Glass Microfiber Pleated, 20″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.8um, Glass Microfiber Pleated, 30″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE

Polyethersulfone (PES) Membrane Cartridge

-CLS’s Polyethersulfone (PES) cartridges offer a wide array of micron ratings from .1 to 5 microns
-All Polyethersulfone cartridges are produced in-house on the most modern equipment available
-Complete in-house testing guarantees a superior and consistent product
-Cartridges have excellent dirt holding capacity with low flow resistance
-Naturally hydrophilic media does not need wetted before use
-We offer all end cap configurations to fit your applications and housings
-Polyethersulfone media is excellent for its low protein binding and chemical compatibility
-Cartridges are manufactured to meet FDA Title 21 for food contact applications
-Cartridges are constructed in a clean room environment
-Cartridges may be ordered as final rinsed with 18 mega ohm water

  • PES Pleated, 0.1um, 10″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • PES Pleated, 0.1um, 10″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • PES Pleated, 0.1um, 10″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • PES Pleated, 0.1um, 20″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • PES Pleated, 0.1um, 20″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • PES Pleated, 0.1um, 20″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • PES Pleated, 0.1um, 30″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • PES Pleated, 0.1um, 30″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • PES Pleated, 0.1um, 30″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • PES Pleated, 0.1um, 40″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • PES Pleated, 0.1um, 40″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • PES Pleated, 0.1um, 40″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE

High Efficiency MB Pleated Cartridges

-CLS offers the highest grade, 90% and 99.98% efficient elements on the market today
-Our media is manufactured in-house under strict guidelines to ensure consistency
-In-house lamination and calendaring of our medias allow us to control the final media grades
-Complete in-house testing with a Capillary Flow ——-Porometer guarantees a superior and consistent product
-8 micron ratings and multiple lengths to ensure we produce the element you require
-Elements have thermally bonded end caps and ultrasonic welded media seams for a one piece construction
-Final, one piece construction up to 40″ long ensures zero bypass
-We install the maximum amount of media in each filter without pleat binding for increased dirt loading capacity
-Elements are 100% polypropylene—media, inner and outer supports and end caps
-Elements meet FDA Title 21 regulations for food and water contact
-Cartridges are constructed in a clean room environment
-Cartridges may be final rinsed with 18 mega ohm water

  • 0.2um Absolute, High Efficiency MB Pleated, 10″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • 0.2um Absolute, High Efficiency MB Pleated, 10″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.2um Absolute, High Efficiency MB Pleated, 20″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • 0.2um Absolute, High Efficiency MB Pleated, 20″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.2um Absolute, High Efficiency MB Pleated, 30″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • 0.2um Absolute, High Efficiency MB Pleated, 30″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.2um Absolute, High Efficiency MB Pleated, 40″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • 0.2um Absolute, High Efficiency MB Pleated, 40″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.2um Nominal, High Efficiency MB Pleated, 10″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • 0.2um Nominal, High Efficiency MB Pleated, 10″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.2um Nominal, High Efficiency MB Pleated, 20″Long, Inner/Outer Core, 222/Fin

    REQUEST QUOTE
  • 0.2um Nominal, High Efficiency MB Pleated, 20″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE

Melt Blown Liquid Cartridges – 4.5″ Standard

• FDA Title 21 Compliant
• Great Value
• No Glue or Binders
• High Dirt Loading
• Low Pressure Drop

  • 100um, Melt Blown, 4.5″ x 10″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 4.5″ x 10″Long, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 4.5″ x 20″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 4.5″ x 20″Long, Open/Open

    REQUEST QUOTE
  • 10um, Melt Blown, 4.5″ x 10″Long, 222/Flat

    REQUEST QUOTE
  • 10um, Melt Blown, 4.5″ x 10″Long, Open/Open

    REQUEST QUOTE
  • 10um, Melt Blown, 4.5″ x 20″Long, 222/Flat

    REQUEST QUOTE
  • 10um, Melt Blown, 4.5″ x 20″Long, Open/Open

    REQUEST QUOTE
  • 1um, Melt Blown, 4.5″ x 10″Long, 222/Flat

    REQUEST QUOTE
  • 1um, Melt Blown, 4.5″ x 10″Long, Open/Open

    REQUEST QUOTE
  • 1um, Melt Blown, 4.5″ x 20″Long, 222/Flat

    REQUEST QUOTE
  • 1um, Melt Blown, 4.5″ x 20″Long, Open/Open

    REQUEST QUOTE

Melt Blown Liquid Cartridges – Absolute

• 99% Efficiency at designated microns
• FDA Title 21 Compliant
• Integrated 4 Stage Depth Loading
• Cored Center for Filter Stability
• High Dirt Loading
• Heat set surface to stop fiber migration

  • 100um, Melt Blown, 99%, 10″Long, Inner Core, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 10″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 20″Long, Inner Core, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 20″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 30″Long, Inner Core, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 30″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 40″Long, Inner Core, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 40″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 50″Long, Inner Core, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 99%, 50″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 10um, Melt Blown, 99%, 10″Long, Inner Core, 222/Flat

    REQUEST QUOTE
  • 10um, Melt Blown, 99%, 10″Long, Inner Core, Open/Open

    REQUEST QUOTE

Melt Blown Liquid Cartridges – High Efficiency

• 95% Efficiency at designated microns
• FDA Title 21 Compliant
• Integrated 4 Stage Depth Loading
• High Dirt Loading
• Low Pressure Drop

  • 100um, Melt Blown, 95%, 10″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 10″Long, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 20″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 20″Long, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 30″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 30″Long, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 40″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 40″Long, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 50″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 95%, 50″Long, Open/Open

    REQUEST QUOTE
  • 10um, Melt Blown, 95%, 10″Long, 222/Flat

    REQUEST QUOTE
  • 10um, Melt Blown, 95%, 10″Long, Open/Open

    REQUEST QUOTE

Melt Blown Liquid Cartridges – Standard

• FDA Title 21 Compliant
• Great Value
• No Glue or Binders
• High Dirt Loading
• Low Pressure Drop
WQA certified and tested to meet NSF/ANSI 61

  • 100um, Melt Blown, 10″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 10″Long, 226/Fin

    REQUEST QUOTE
  • 100um, Melt Blown, 20″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 20″Long, 226/Fin

    REQUEST QUOTE
  • 100um, Melt Blown, 20″Long, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 30″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 30″Long, 226/Fin

    REQUEST QUOTE
  • 100um, Melt Blown, 30″Long, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 40″Long, 222/Flat

    REQUEST QUOTE
  • 100um, Melt Blown, 40″Long, 226/Fin

    REQUEST QUOTE
  • 100um, Melt Blown, 40″Long, Open/Open

    REQUEST QUOTE
  • 100um, Melt Blown, 50″Long, 222/Flat

    REQUEST QUOTE

Nylon 6,6 Membrane Cartridges

-CLS Nylon 6,6 cartridges offer a wide array of micron ratings from .03 to 20 microns
-All Nylon 6,6 are produced in-house on the most modern equipment available
-Complete in-house testing guarantees a superior and consistent product
-We offer all end cap configurations to offer you the proper cartridge to fit your applications and housing
-All Nylon 6,6 membrane elements are internally supported offering strength to prevent media failure
-Cartridges have excellent dirt holding capacity with low flow resistance
-Cartridges are compliant with the FDA Title 21 for food and potable water contact
-End caps are thermally welded with no additives
Cartridges are constructed in a clean room environment
-Naturally hydrophilic media does not need to be wetted before use
-Cartridges may be ordered as final rinsed with 18 mega ohm water

  • 0.03um, Nylon 6,6 Membrane Pleated, 10″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.03um, Nylon 6,6 Membrane Pleated, 10″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.03um, Nylon 6,6 Membrane Pleated, 20″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.03um, Nylon 6,6 Membrane Pleated, 20″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.03um, Nylon 6,6 Membrane Pleated, 30″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.03um, Nylon 6,6 Membrane Pleated, 30″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.03um, Nylon 6,6 Membrane Pleated, 40″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.03um, Nylon 6,6 Membrane Pleated, 40″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.1um, Nylon 6,6 Membrane Pleated, 10″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.1um, Nylon 6,6 Membrane Pleated, 10″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE
  • 0.1um, Nylon 6,6 Membrane Pleated, 20″Long, Inner/Outer Core, 222/Flat

    REQUEST QUOTE
  • 0.1um, Nylon 6,6 Membrane Pleated, 20″Long, Inner/Outer Core, 226/Fin

    REQUEST QUOTE

PTFE Membrane Cartridges

-CLS membrane filters offer a wide array of micron ratings from .02 to 5 microns
-Excellent for chemical and pharmaceutical filtration applications
-PTFE cartridges are hydrophobic, resisting water while offering excellent air and gas flow
-All PTFE cartridges are produced in-house on the most modern equipment available
-Complete in-house testing guarantees a superior and consistent product
-We offer all end cap configurations to offer you the proper cartridge to fit your applications and housings
-Cartridges are manufactured to meet FDA Title 21 for food contact applications
-Cartridges are constructed in a clean room environment
-Cartridges offer structural stability, long life, and high performance with high filtration area
-Custom applications can be made to meet your pore and density requirements
-Cartridges may be ordered as final rinsed with 18 mega ohm water

Stainless Steel Mesh Cartridges

-CLS stainless steel cartridge filters are produced with the highest quality materials in the USA, offering you the best filters for high temperature applications — up to 525°F
-Cartridges are produced in 304 and 316 stainless steel with welded and crimped construction
-Retention ratings range from 5 to 840 micron
With 8 different lengths and 6 different end cap configurations, we are sure to produce the element you require
-Very high flow rates in both cylindrical and pleated designs
-Heavy duty construction allows for very high differential pressures; up to 60 PSID
-Low differential pressure allows filtration of very viscous solutions
-Cartridges may be cleaned for extended life

Standard Efficiency Pleated Cartridges

-CLS standard efficiency pleated cartridges are manufactured in-house with 2 grades of media— polypropylene and polyester
-In-house lamination and calendaring of our medias allow us to control the final media grades
-Complete in-house testing guarantees a superior and consistent product
-With 6 micron ratings, 2 standard diameters and 8 standard lengths we are sure to produce the element you require
-We produce our own molds for the PVC end caps so custom sizes and applications are welcomed
-All seams are 100% ultrasonically welded to ensure zero bypass
-Standard diameters are 2.5 and 4.5 inches
-Standard lengths up to 40 inches
-We place a maximum amount of media in each filter without pleat binding for increased dirt holding capacity
-Polypropylene elements with polypropylene cores meet FDA Title 21 regulations for food and water contact

String Wound Cartridges

-CLS string wound elements are manufactured in-house on custom, high-speed, computer- controlled machines for perfect thread spacing
-Customized patterns and spacing offered to adapt to your specialized applications
-Our ink and paint elements have a 3-stage multi pattern winding process offering true depth loading and prevents core blinding
-With 6 media selections and 13 micron ratings, we are sure to produce the element you require
All end cap configurations available to fit your existing housing
-FDA polypropylene and cotton constructed elements are FDA acceptable under CFR title 21 for food and potable water contact
-Standard diameters are 2.5 and 4.5 inches
-Standard lengths from 9.75 up to 40 inches
-“FDA Polypropylene” String Wound Cartridges are Tested and Certified to:
NSF/ANSI 61 Standard &
NSF/ANSI 42 Standard for Component

  • 10um, Standard Efficiency Pleated, Polypropylene, 2.5″OD x 10″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 10um, Standard Efficiency Pleated, Polypropylene, 2.5″OD x 20″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 10um, Standard Efficiency Pleated, Polypropylene, 2.5″OD x 30″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 10um, Standard Efficiency Pleated, Polypropylene, 2.5″OD x 40″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 10um, Standard Efficiency Pleated, Polypropylene, 4.5″OD x 10″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 10um, Standard Efficiency Pleated, Polypropylene, 4.5″OD x 20″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 10um, Standard Efficiency Pleated, Polypropylene, 4.5″OD x 30″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 10um, Standard Efficiency Pleated, Polypropylene, 4.5″OD x 40″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 1um, Standard Efficiency Pleated, Polypropylene, 2.5″OD x 10″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 1um, Standard Efficiency Pleated, Polypropylene, 2.5″OD x 20″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 1um, Standard Efficiency Pleated, Polypropylene, 2.5″OD x 30″Long, Inner Core, Open/Open

    REQUEST QUOTE
  • 1um, Standard Efficiency Pleated, Polypropylene, 2.5″OD x 40″Long, Inner Core, Open/Open

    REQUEST QUOTE
Main Menu