Skip To Content

How Does A Natural Gas Detector Work?

Have you ever wondered why natural gas detectors are regarded as a life-saving piece of equipment? Have you ever thought about how they work? Here is some information to enlighten yourself.

Did you know the gas leak is a significant problem all across the U.S? Knowing that how dangerous a gas leak can be to a human’s health, using this piece of technology is an excellent solution to help you avoid problems. But the question now is, what does a gas detector do?

Here is the answer to your questions. Read below to learn more:

What Does A Gas Detector Do?

You do not need a gas detector in-case the signs are:

  • Dizziness
  • Fatigue
  • Smells of a rotten egg
  • Abdominal pain
  • Nausea
  • Loss of muscle control

But imagine this is when the leak has a smell. Imagine what would be the case if there was so much smell; hence a gas detector can discover a leak. It works by monitoring different gas levels in the air.

These devices run on battery, and once they indicate a high level of concentration in the air, the system will warn you by really hard to miss audible beeps. A gas detector’s primary task is to avoid health consequences and provide safety measures to monitor the air’s gas level.

What Are Some Different Types Of Gas Detectors?

There are many different types of gas detectors to keep you safe.

Here are some of them and how they work:

  • Electrochemical sensors are very sensitive and mostly taken into use to measure toxic gas levels in the air. It senses the electrodes in the air and then gives a signal using electrical currents.
  • Infrared sensors use transmitters to identify combustible gases in the air and its main use it to detect hydrocarbon gases. So this works because it transmits light via the detectors, and if the light comes back altered, the gas detector will tell you the type of gas is in the area and its concentration level.
  • Catalytic sensors are installed on commonly available gas detectors in the market. It holds a platinum wire inside the equipment that trips a warning signal when it comes in contact with combustible gas.

If you’re looking to learn more about natural gasses and how they can be detected, contact The Clean Liquid Systems on 713.253.0100, and we can help you.